Organic Audio Cables

This new line of cables offer Argento quality constructed with a copper conductor, new high-tech braided sheath and the proprietary Argento designed connector in a copper finish. The performance of this cable can fit many systems were the sonic properties of copper is preferred.

The Organic line of cables share the same design principles with its larger siblings- only on a more affordable scale.

Each Organic cable is packaged in a custom fitted sectioned padded case

Organic Audio Cables features:

• Based on the geometry found in the Serenity cables by Argento Audio
• Made of pure copper instead of pure silver.
• Custom made connectors made of the same type of pure copper as the conductors (4-8 times lower resistance than the normal Brass or bronze parts used in most other connectors).
• Connectors feature the patented contact pressure increasing technique also found in the Argento connectors à High contact pressure leading to significantly lower contact resistance.
• No solder points. Interface between Conductors and Connectors is made by a welding technique adding no material à the entire signal path becomes one long piece of copper because the connector and the connector are joined at a molecular level.
• Damped Air dielectric: The conductors are wrapped in an ultra low weight fiber that functions as a damping material to avoid vibrations in the conductor. However the fibers are so porous that they only touch a small part of the total surface of the conductor and therefore AIR is the primary dielectric. à heavily reduced microphonics and very low dielectric absorption.